Expansion of our production

7. März 2025

cts is growing by a further 11,000 square meters.

The most significant investment made by CTS GmbH last year was undoubtedly the construction of the new production hall at the company's headquarters in Burgkirchen an der Alz, Germany.


There were many reasons for the expansion, the most important being the fact that the previous production hall on Fuhrmannstraße, just a few meters away, is at full capacity and will not be sufficient in the future. This is also due to the continued excellent order situation, which means that production capacities will be fully utilized for the next few years.


Another reason is the centralization of production automation. Until now, production automation was distributed across different locations. In addition, there were various external warehouses, which posed further logistical challenges.
The new building, which is over 100 meters long and 34 meters wide, will now house almost the entire production automation – including storage areas.

Facts about the hall

The 105-meter-long, 34-meter-wide hall with a maximum height of 13.5 meters is located on a 110,000-square-foot property.
This provides a full 32,000 square feet of production and storage space. In addition, the directly adjacent 8700-square-foot office space will also house the construction, service and purchasing departments in the future.
The new building was constructed according to the highest possible energy standard today and is equipped with a 300kW air-to-air heat pump for heating and cooling in the air circulation system and an 800kWp photovoltaic system.

Some facts about the construction:



  • Approx. 28,000 tons of gravel/grit/sand were used
  • Approx. 5,000 tons of concrete
  • Approx. 1,800 m³ of heat insulation
  • Approx. 550 m³ of construction timber
  • Approx. 1,200 m of light strips & lighting
  • Approx. 55 km of electric cable






  • Approx. 2,000 m² of paving stones
  • Property fencing: approx. 500 meters of fence and 3 electric gates with 10-12 m entry width
  • Fire water pond: over 1,300 m³ water capacity
  • 2 fire water extraction points
  • 15 large trees, 1,200 ground covers,
  • 600 shrubs, 35 m³ bark



A brief digression on capacitive measurements

Many thanks to the contractors for their excellent work, which met all deadlines under great time pressure.
Here you can see the complete construction in a time lapse:
Time lapse of the new production.